Product ID:R-70 ULTRA, DUAL SHIELD MILD STEEL, T-1, (SUPDAT)
MSDS Date:11/21/1997
FSC:3439
NIIN:00N085792
MSDS Number: CHCXC

ESAB GROUP INC

801 WILSON AVE
HANOVER, PA 17331
US

Emergency Phone: 717-637-8911

Info Phone: 717-637-8911

Cage: HO829

ESAB GROUP INC

517 HANOVER, PA 17331 US

Telephone: 717-637-8911

Cage: HO829

MANGANESE (SARA 313)

CAS: 7439-96-5

RTECS: OO9275000

Fraction By Weight: 3-4%

OSHA PEL 5 MG/M3 DUST, C

ACGIH TLV: 5 MG/M3 DUST

MANGANESE (MANGANESE COMPOUNDS AS MN) (SARA 313)

CAS: 7439-96-5

RTECS: OO9275000

Fraction By Weight: <1%

OSHA PEL 5 MG/M3 DUST, C

ACGIH TLV: 5 MG/M3 DUST

NICKEL (SARA 313) (CERCLA)

CAS: 7440-02-0

RTECS: QR5950000

Fraction By Weight: <1%

OSHA PEL 1 MG/M3

ACGIH TLV: 1 MG/M3

SILICON; (SI & SIO*2)

CAS: 7440-21-3

RTECS: VW0400000

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST

TITANIUM OXIDE; (TITANIUM DIOXIDE)

CAS: 13463-67-7

RTECS: XR2275000

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST

IRON; (IRON OXIDES)

CAS: 7439-89-6

RTECS: NO4565500

OSHA PEL N/K

ACGIH TLV: N/K

IRON

CAS: 7439-89-6

RTECS: NO4565500

OSHA PEL N/K

ACGIH TLV: N/K

PROCESS, PROCS & CONSUMABLES USED.

RTECS: 9999999ZZ

OF OXIDES & FLUORIDES OF MATLS LISTED AS WELL AS

RTECS: 9999999ZZ

(REFER TO "CHARACT OF ARC WELDING FUME" FROM AWS).

RTECS: 9999999ZZ

LIM FOR WELD FUMES OF 5MG/M3 REACHED. ONLY WAY TO

RTECS: 9999999ZZ

ANALYSIS. COMPOSITION & QTY OF FUMES & GASES TO

RTECS: 9999999ZZ

OBTAINED INSIDE WELDER'S HELMET, IF WORN, OR IN

RTECS: 9999999ZZ

AIRBORNE PARTICLES GENERATED BY WELDING & ALLIED

RTECS: 9999999ZZ

LUNGS, CNDTN WHICH MAY BE SEEN AS DENSE

RTECS: 9999999ZZ

TO LENGTH OF EXPOS. CHGS SEEN ARE NOT NECESSARILY

RTECS: 9999999ZZ

IN ADDN, X-RAY CHGS MAY BE CAUSED BY NON-WORK

RTECS: 9999999ZZ

CAUSE PULM FIBROSIS & EDEMA. OVEREXP TO MANGANESE

RTECS: 9999999ZZ

MUSC WEAK, EMOTIONAL DISTURBS & SPASTIC GAIT.

RTECS: 9999999ZZ

MOUTH. IF NO DETECTABLE PULSE, BEGIN CPR.

RTECS: 9999999ZZ

COMPRESSES & CALL MD.

RTECS: 9999999ZZ

& FULL LENGTH FACESHIELD W/FILTER LENS. AS RULE

RTECS: 9999999ZZ

ZONE. THEN GO TO NEXT LIGHTER SHADE WHICH GIVES

RTECS: 9999999ZZ

FLASH GOGGLES, IF NECESSARY, TO SHIELD OTHERS.

RTECS: 9999999ZZ

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:ELEC ARC WORK MAY CREATE ONE/MORE OF
FOLLOWING HLTH/PHYSICAL HAZS. FUMES & GASES CAN BE DANGEROUS TO
HLTH. ELEC SHOCK CAN KILL. ARC RAYS CAN INJURE EYES & BURN SKIN.
NOISE CAN DMG HEARING. EFTS OF ACU TE OVEREXP TO GASES, FUMES &
DUST MAY CAUSE IRRIT OF EYES, LUNGS, NOSE & THROAT. SOME TOX GASES
ASSOC (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NICKEL: IARC MONO, VOL 49, PG 257,
1990:GROUP 2B. NTP 7TH ANNUAL REPORT ON CARCINS, 1994:ANTIC TO BE
CARCIN.
Effects of Overexposure:HLTH HAZ: W/WELDING MAY CAUSE PULM EDEMA, ASPHY
& DEATH. ACUTE OVEREXP MAY INCL SIGNS & SYMPS SUCH AS WATERY EYES,
NOSE & THROAT IRRIT, HDCH, DIZZ, DFCLTY BRTHG, FREQUENT COUGH/CHEST
PAIN, METALLIC TA STE, NAUS, FEVER & ALLERGIC RXN. CHRONIC: EFTS OF
CHRONIC OVEREXP TO AIR CONTAMINANTS MAY LEAD TO THEIR ACCUM IN(ING
15)
Medical Cond Aggravated by Exposure:INDIVIDUALS W/ALLERGIES OR IMPAIRED
RESP FUNC MAY HAVE SYMPS WORSENED BY EXPOS TO WELDING FUMES.
HOWEVER, SUCH REACTION CANNOT BE PREDICTED DUE TO THE VARIATION IN
COMPOSITION & QTY OF DECOMP PRODS.

First Aid:INGEST: CALL MD IMMED . EYES: IMMED FLUSH W/POTABLE WATER FOR
AT LST 15 MIN, SEEK ASSISTANCE FROM MD . SKIN: FLUSH W/COPIOUS AMTS
OF WATER. CALL MD . IN CASE OF EMER CALL FOR MED AID . EMPLOY FIRST
AID TECHNIQUE RECOM BY RED CROSS. INHAL:IF BRTHG IS DFCLT, GIVE
OXYGEN & CALL MD. FOR ELEC SHOCK, DISCONNECT & TURN OFF POWER. IF
NOT BRTHG, BEGIN ARTF RESP, PREF MOUTH-TO- (ING 20)

Extinguishing Media:USE EXTINGUISHING MEDIA RECOMMENDED FOR BURNING
MATERIALS AND FIRE SITUATION.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA AND FULL PROTECTIVE
EQUIPMENT . ONLY PACKAGING FOR THIS PRODUCT WILL BURN.
Unusual Fire/Explosion Hazard:PROD WILL NOT BURN. HOWEVER, WELDING ARCS
& SPKS CAN IGNIT COMBUST & FLAM MATLS. SEE ANSI Z49.1 "SFTY IN
WELDING & CUTTING" & "SAFE PRACTICES" CODE:SP, (SUPDAT)

Spill Release Procedures:NOT APPLICABLE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:READ AND UNDERSTAND MANUFACTURER'S
INSTRUCTIONS & PRECAUTIONARY LABEL ON THIS PRODUCT.
Other Precautions:SEE ANSI Z-49.1 "SAFETY IN WELDING & CUTTING" PUB BY
AWS & OSHA PUB 2206 (29 CFR 1910) FOR MORE DETAILS ON HNDLG & USE.
TRAIN WELDER TO KEEP HEAD OUT OF FUMES. TRAIN WELDER NOT TO TOUCH
LIVE ELEC PART S & TO INSULATE SELF FROM WORK & GROUND.

Respiratory Protection:USE NIOSH APPROVED RESPIRABLE FUME RESPIRATOR OR
AIR SUPPLIED RESPIRATOR WHEN WELDING IN CONFINED SPACE OR WHERE
LOCAL EXHAUST OR VENTILATION DOES NOT KEEP EXPOSURE BELOW TLV.
Ventilation:USE ENOUGH VENT, LOC EXHST AT ARC OR BOTH TO KEEP FUMES &
GASES BELOW TLV IN WORKER'S BRTHG ZONE & GENERAL AREA.
Protective Gloves:WELDER'S GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGS (ING 22)
Other Protective Equipment:ANSI APPRVD EYE WASH & DELUGE SHOWER . MAY
INCL ARM PROTECTOR, APRON, HAT, SHOULDER PROT & DARK SUBSTANTIAL
CLTHG.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
MFR'S TRADE NAME/PART NO: T-2, T-9 & T-12 FLUX CORED WELDING
ELECTRODES. EXPLO HAZ: PUB BY AWS, PO BOX 351040, MIAMI, FL 33135 &
NFPA 51B "CUTTING & WELDING PROCESS" PUB BY NFPA, BATTERYMARCH
PARK, QU INCY, MA 02269 FOR ADDNL FIRE PREVENTION & PROT INFO.

Appearance and Odor:TUBULAR STEEL WIRE CONTAINING MINERALS AND ALLOYS;
ODORLESS.

Stability Indicator/Materials to Avoid:YES
NONE CURRENTLY KNOWN.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:WELDING FUMES & GASES CANNOT BE
CLASSIFIED SIMPLY. COMPOSITION & QTY OF BOTH DEPEND ON MATL BEING
WORKED, (ING 8)

Waste Disposal Methods:PREVENT WASTE FROM CONTAMINATING SURROUNDING
ENVIRONMENT. DISCARD ANY PRODUCT, RESIDUE, DISPOSABLE CONTAINER OR
LINER IN AN ENVIRONMETNALLY ACCEPTABLE MANNER IN FULL COMPLIANCE
WITH FEDERAL, STATE AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.